The 396 Big Block is mounted to the engine stand. Now it’s all about fine-tuning and tweaking. Watch as the team attaches a chain around the engine to hoist it up, unbolt it from the stand, and drop it back down into the engine bay of the 1965 Chevy Malibu SS:
As they are getting ready to drop the engine in place, the team hits a tiny speed bump. The Hooker headers are a tight squeeze, so they were removed before dropping the engine down onto the frame.
Also, as it is right now, the alternator would hit the bracket for the rack-and-pinion system that they have in place, so they will need to remove the alternator, do a little fabrication to the brackets and re-install it a little higher after the engine is in place.
Now that the motor is bolted in, with two bolts to the motor mounts, Paul Naber and the team will need to remove the bell housing so they can install the clutch. They will then put the bell housing back on and bolt the transmission up with the cross-member to place the engine where it needs to be.
As they prepare to install the Muncie transmission and attach it to the bell housing, the clutch is in place so the only thing left is setting it in and putting the bolts in. The driveshaft is lined up and put in place. Getting ready to move the rolling chassis onto the lift to re-install and fit the headers, and then do a little work on the alternator.
Now that the 396 big block engine has been bolted back onto the frame, watch as The Build team continues to put back together the 1965 Chevy Malibu restomod. Make it a priority to watch the other episodes on our YouTube channel, and follow the progress of our collector vehicle on our Facebook page too!