Tag Archives: Malibu SS

The Build – Installing Gauges

Now that the hood has been installed and the wiring has been tucked in the classic 1965 Chevy, Rick and the team will begin to work on the gauges. The gauges will be removed from the dash. They will be converting the stock gauge panel first, as they will be replacing the clock with a tachometer. Also, the American Modern team will be replacing the idiot lights with gauges.

First, the new gauge will require cutting the metal of the original ’65 Malibu restomod gauge mounting brackets, where the new gauge will stick through. Then mark the places where the mounting holes will be placed. After the cutting, file the edges, drill the holes, and mount in place.

 

gauge cut out

Next, the replacement tachometer will be taking the place of where the clock was originally in place in the 1965 Chevy Malibu SS restomod. After the tach is set, clean up the areas that are covered with dust and residue from the installation, and get prepared to reinstall the updated mounting bracket.

gauge back

The next step in the process is to install the new lens on top of the three new gauges. The turn signal indicator lenses will be reinstalled next. Back in the day, they had to use a white bulb, then place a green tint, made of a glass circle, to be placed on the outside of the light.

gauges with turn signals

The gauge cluster is mounted to the back of the dash, along with the switch panel in place instead of the radio.

Watch as The Build team continues to put back together the 1965 Chevy Malibu restomod. Make it a priority to watch the other episodes on our YouTube channel, and follow the progress of our collector vehicle on our Facebook page too!

gauges in dash complete

The Build – Removing seat covers

In the previous episode of The Build, the team painted the exterior of the 1965 Chevy Malibu, along with adding a customized pinstripe that included American Modern’s logo. In this next episode, Rick Drewry and the rest of the team will begin to work on the interior. Step one will be to remove the current seat covers, then re-cover the seats.

Rick will start by unbolting the frame of the car seat. Some of the time you’ll get lucky when unbolting, but most of the time, elbow grease is required, along with some tools that provide good torque. One of the first things that are required to be removed are the seat adjusters. You’ll need to use an Allen wrench to remove it, since there is an Allen-head screw holding it into its place. With the trim and clips now removed, they can now separate the top part of the seat from the bottom part.

A couple bumpers will need to be taken off next, where the top of the seat rests on the bottom part of the seat. The hog rings hold the material to the frame, which can all be simply cut off and disposed. The material is wedged underneath the seat tracks with hooks, so the next step is to pull the material away from under the seat tracks. Next, a row of hog rings go along each seam, so if you turn the material inside out to expose the cushion, you’ll then find the steel rods. These steel rods will need to be removed in order to make the seat fit correctly. New seat covers are a requirement for The Build’s 1965 Chevy Malibu restomod.

seat covers

Similar to the bottom part of the seat, the hog rings will be required to be cut off of the top of the seat as well. Be sure you do an extremely thorough job of removing every single hog ring, as it will not feel very pleasant if one remains and you sit on it before driving away in your restored collector car.

seat cover hog rings

As you are fully aware from staying up-to-date with “The Build” , the 1965 Chevy Malibu SS, named Ami G., has made huge strides to get to where she is today. You definitely need to be sure to stay current with all of her updates. Also, be sure to subscribe to our YouTube Channel to get the complete list of episodes of “The Build”.