Tag Archives: coil-over

The Build – Connecting the Frame to the Chassis

Our team of collector car specialists continue to make the finishing touches on the 1965 Chevy Malibu SS. Watch as the team runs all the wires, including the battery cable, through the frame:

Rick will wrap it up and over the starter, to the solenoid. That way there is plenty of clearance from the header, because the headers can literally burn the coating off of the battery cable. Rick will then cut around the outside cover, in order to crimp in the end to pull it right up to the starter.

Capture

Capture2

The fuel hose and battery cable are now installed, everything is connected that needs to be connected, and it’s time to put the body on, and mount it to the frame for the final time. The crew will wheel the frame out, and lift the body up, then lower the body down onto the frame. In order to align it up exactly, it takes extreme attention to detail, along with exact measurements.

Capture4

The body bolts will be hand-tightened first, and then again will be tightened to the chassis and the frame with an impact wrench so it’s nice and snug.

Capture7

The body is now mounted to the frame, with the engine sitting pretty low. So luckily the coil-over shocks will allow for adjustments, in order to clear such things like speedbumps. Moving the springs on the adjustable shocks with the bottom knuckle lock blot, to the shock to the spring.
Capture8

Now that the frame has been bolted back onto the chassis, watch as The Build team continues to put back together the 1965 Chevy Malibu restomod. Make it a priority to watch the other episodes on our YouTube channel, and follow the progress of our collector vehicle on our Facebook page too!